Wood Screws

2. Click to place the object in the drawing, and click again to set the object’s rotation. If this is the first time the object is placed in the drawing, an object properties dialog box opens. These parameters apply to subsequently created objects; they can be changed later by accessing them from the Object Info palette.

Parameter	Description
View (2D only)	Select the 2D view
Series	Select inch or metric to display the appropriate nominal sizes
Head Type	Select the wood screw head type
Nominal Size	Select an inch or metric nominal size
Length	For a custom length value, deselect Use Standard Length Increments and enter the length under the screw head (or overall length for flat head screws)
Slot Type	Specify the slot type
Use Standard Length Increments	Select to automatically adjust the length to the nearest increment based on size; deselect to enter a custom length
Show Threads	Select to create the wood screw with threads
Show Center Line (2D only)	Select to draw the wood screw with center line(s)

Wood Screws

Parameter

Description