Document Setup

Use the Document Setup command to set up a file’s basic characteristics (units, scale, drawing area, and grid) as well as define the sheet border and title block settings.

2. The Document Setup dialog box opens. Set the parameters for the drawing. See Setting up the Drawing for more information on units, scale, drawing grids, and print area.

Parameter	Description
Units, Scale and Grids
Drawing Units	Click Change to open the Units dialog box; specify the global unit settings for the project
Layer Scale	Click Change to open the Layer Scale dialog box. Specify the default layer scale for the project. This scale will be used for all floor design layers (Mod-Floor-#) and associated design layers such as Mod-Slab.
Drawing Area	Click Change to open the Page Setup dialog box; specify the drawing’s printable area
Drawing Grids	Click Change to open the SmartCursor Settings dialog box; specify the reference and snap grid settings
Georeferencing	If this document will use georeferencing, click Change to open the Document Georeferencing dialog box. Specify the default georeferencing information for all design layers; see GIS and Georeferencing.
Sheet Border/Title Block	If not created during setup, sheet borders and title blocks can be added manually with the Sheet Border tool (see Adding a Sheet Border)
Sheet Border	Select the sheet border to automatically include as the file is set up, or leave the default selection of None to create no sheet border
Title Block	Select the title block from either the default content or the current file’s content to automatically include as the file is set up (see Resource Libraries), or leave the default selection of None to create no title block
Use Border Settings
As preferences	Saves the sheet border and title block selections and applies them to the sheet layers when the Create Standard Viewports command is selected (Vectorworks Architect required)
To create a border now on layer	Places the specified sheet border and title block on the selected layer immediately

To use the Issue Manager (see The Issue Manager), select one of the predefined sheet border styles.

Select the Document Setup command again to re-adjust a sheet border if the paper size has changed.

Document Setup

Parameter

Description