Spot04023.pngInserting bridles automatically

Mode

Tool

Tool set

Auto Insertion

Bridle

Rigging

To insert a bridle automatically:

Click the tool and insertion mode.

Click the desired bridle type mode.

The Auto Insertion mode is not available when inserting reversed two leg bridles.

Click Preferences; the Down Leg Preferences dialog box opens.

Select the default option for building the down leg.

Parameter

Description

Build Down Leg Using

Select Bridle Part or Hoist as the default component for the down leg

Select a hoist symbol to insert

When Hoist is selected, click the Resource Selector to select a hoist symbol.

If the available chain length is shorter than the required down leg length, bridle parts are added automatically to fill the missing length.

Move the mouse to the object that the bridle will support.

Using Auto Connect technology, the valid connection points are highlighted, and a preview of the bridle legs is dynamically displayed.

Click on the rigging object to insert the bridle as previewed.

The bridle is inserted in the drawing according to the settings in the Bridle preferences dialog box.

Hoists04025.png 

The bridle parameters can be edited later from the Object Info palette; see Bridle properties.

A different type of hoist can be selected for the down leg by clicking Select Symbol on the hoist Object Info palette.

Inserting bridles

Inserting bridles manually

Managing bridle parts

Bridle preferences

Bridle properties

Hoist properties

 

Was this page helpful?