Inserting toilet stalls
|
Mode |
Tool |
Tool set |
|
Modes for The Symbol Insertion tool |
Toilet Stall
|
Furn/Fixtures |
The Toilet Stall tool provides access to a variety of standard configurations available from the Resource Manager, in addition to individual objects created using the tool. The tool can be used to create your own style resources (see Concept: Plug-in object styles).
To insert a toilet stall:
Click the tool and mode.
Do one of the following:
Click Active Def on the Tool bar to select a resource from the Resource Selector.
Click Preferences to open the object properties dialog box and specify the tool’s default parameters.
The parameters can be edited later from the Object Info palette.
Click to show/hide the parameters.Click to show/hide the parameters.
|
Parameter |
Description |
|
Style |
Replace, remove, or edit the current style, or create a new plug-in object style for this object. Editing a style changes all instances in the file that use the style. |
|
Hide Style Parameters |
Hides the parameters that are set by style; these cannot be edited from the dialog box or Object Info palette |
|
Flip |
If the object is in a wall, click to flip the object orientation |
|
Set Position |
If the object is in a wall, click to activate the Move by Points tool in Reference Point mode and move the object by a specified distance from a reference point |
|
Number of Stalls |
Select the number of stalls to place together as a single, grouped object |
|
Stall Width |
Enter the stall width |
|
Stall Depth |
Enter the stall depth |
|
Partition Thickness |
Enter the thickness for the stall partitions |
|
Clg Height (Floor and Clg Mtd or Ceiling Mtd only) |
Enter the height for ceiling-mounted stall supports |
|
Partition Type |
Select the mounting type for the stall partitions. If none is selected for Partition Type, all parameters related to partitions, doors, or grab bars will not have any visible effect on the toilet stall. |
|
Left Partition |
Deselect to remove the left partition from the stall. If you have multiple stalls, this will only remove the farthest left partition. |
|
Dividing Partition |
Includes partitions between each stall |
|
Right Partition |
Deselect to remove the right partition from the stall. If you have multiple stalls, this will only remove the farthest right partition. |
|
Front Partition |
Deselect to remove the front partition from the stall. If the door is set to the front partition, the door is also removed. |
|
Door |
Includes doors on each stall |
|
Door Closed in 3D |
Displays the stall door as closed in 3D views. Deselect to have the stall door open at an angle. |
|
Show Door In |
Select which partition for the door to be a part of, if any. Doors cannot be set to the right or left partitions if there are multiple stalls in the toilet stall group. |
|
Door Swing |
Select the direction the door opens |
|
Door Width |
Enter the door width |
|
Door Offset |
Enter the door offset from the partition |
|
Fixture Position |
Select the position of the fixture within the stall |
|
Show 2D Accessible Icon |
Display the accessible symbol in 2D view |
|
Show Turning Circle |
Display the turning circle for wheelchair access in 2D view. The turning circle requires a minimum clear space in the stall 62” wide by 60” deep. |
|
Left/Rear/Right Grab Bar |
Places a grab bar on the stated side of the stall |
|
Show Fixture |
Displays the toilet fixture |
|
Choose Fixture |
Select the desired toilet fixture from a library or the current file. Select a symbol from the graphical list of Symbols. |
Click on the drawing to place the object, and click again to set the rotation.
Optionally, create a style resource from the object (see Standard plug-in object styles without catalog options).
