Kind

Indicates the type of light source; change to a different type by selecting a different kind from the displayed list

A custom, area, or line light requires the Renderworks product.

On/Off

Shows or hides the light produced by the light source. This setting can also be accessed from the light context menu: right-click (Windows) or Ctrl-click (Mac) on the light, and select Turn On or Turn Off.

Auto Update

Automatically renders the drawing when rendering-related parameters change

Update

When Auto Update is deselected, click to render the drawing when rendering-related parameters change

Cast Shadows

(Renderworks required)

Select to create shadows

Soft Shadows

(Renderworks required)

Creates more realistic shadows by decreasing hard edges; rendering is slower when this option is enabled

Lit Fog

(Renderworks required)

Creates a special volumetric lighting effect for point lights and spot lights when used in combination with the Lit Fog Renderworks background weather effect (see Creating Renderworks Backgrounds)

Use Emitter

(Renderworks required)

For accuracy, specifies the light’s actual brightness and color temperature; leave deselected to use the light as a simple light source. Required for a custom, area, or line light. The emitter brightness of all light objects in a scene with Use Emitter selected can be controlled in Lighting Options; see Setting Lighting Options.

Brightness

Specifies the light source brightness; enter a percentage or drag the slider bar. A value over 100% can be entered. This parameter is not available for custom, area, and line lights, or if Use Emitter is selected (Renderworks required).

Brightness From

(Renderworks required)

Specifies the location of the light intensity data for a custom light (either user input or distribution file); the distribution file can be specified by clicking Load Distribution

Brightness Value

(Renderworks required)

Specifies the brightness as an accurate number

Brightness Unit

(Renderworks required)

Select Lux, Lumens, Footcandles, or Candelas for the unit of Brightness; the available units depend on the light type

Dimmer

(Renderworks required)

Dims the light source brightness (intensity); enter a percentage or drag the slider bar. Only the brightness of the light source is affected; the color temperature is not changed.

Light Rotation Angle

(Renderworks required)

Specifies the rotation angle of a custom light source around an axis connecting the light location to the light target; this angle defines the plane for the intensity distribution curve, and is displayed in red on the custom light object

Use Distribution File

(Renderworks required)

Specifies whether to use the attached emission profile data file for the custom light

Distribution File

(Renderworks required)

For a custom light, displays the distribution file name when a valid distribution file has been selected, or “None” if a valid distribution file has not been designated (click Load Distribution to specify a file)

Load Distribution

(Renderworks required)

For a custom light, loads light emission profile data from a standard file. The brightness value is obtained using the integral of the raw emission data provided with the file. The file must be a text file with industry standard intensity distribution data in .ies format.

Color Temperature

(Renderworks required)

Specifies the light color temperature in Kelvin. This refers to an ideal black body emitter, glowing “red hot” or “white hot.” A lower temperature generates an orange color; the hotter the temperature, the closer to white the color of the light is (see Correlated Color Temperature for typical light source color temperature ranges).

Specifying this parameter is optional. If not specified, the default temperature is 0, meaning that the final emission color for the light is entirely controlled by the selection in Color.

When the temperature is specified, Color cannot be changed. The final emission color is set by the Color Temperature.

Color temperature settings can be white-balanced on a per-layer basis; see Setting Lighting Options.

Color

Specifies a color associated with the light source; click the color box to select the color. This parameter is not available if Use Emitter is selected and a Color Temperature is specified (Renderworks required).

Distance Falloff

Indicates the distance falloff function for a point, spot, custom, area, or line light (specifies the rate of intensity change while moving along the beam away from the light source)

Quality

(Renderworks required)

For area and line lights, specifies the sampling quality of the light; select From Render Mode to use the settings specified for Soft Shadows quality in the rendering options

Render Geometry

(Renderworks required)

For area and line lights, renders the light object geometry

Spread/Beam diagram

Drag the handles on the diagram to set the spot light Spread and Beam angles, or enter the values in the fields below the diagram

Spread

Specifies the spread angle of the spot light (light cone’s maximum angle)

Beam

Specifies the beam angle of the spot light (cone of light that does not change intensity up to the spread angle)

X/Y/Z or X’/Y’/Z’

Specifies the location of the light source in relation to the active layer plane or working plane

Look To Height

For spot lights, sets the Z height above the active layer plane of the spot light target handle

Azimuth

Indicates the azimuth for a directional light (South at zero degrees); enter new values or drag the slider bar to set

Elevation

Indicates the elevation (degrees above the horizon) for a directional light; enter new values or drag the slider bar to set

Pan/Tilt

Click the top button to display the spot light or custom light beam pan and tilt angles; enter new values or drag the slider bar to set

±X/±Y/±Z

Click the bottom button to display the light beam direction in terms of its X, Y, and Z components

Set Light to View

Sets the orientation of the directional, spot, or custom light to that of the current view. This setting can also be accessed from the light context menu: right-click (Windows) or Ctrl-click (Mac) on the light, and select Set Light to View.

Set View to Light

Sets the orientation of the current view to that of the directional, spot, or custom light. This setting can also be accessed from the light context menu: right-click (Windows) or Ctrl-click (Mac) on the light, and select Set View to Light.

Caustic Photons
(Renderworks required)

For point, spot, or custom light objects, select how intensely light patterns should be focused by reflective and transparent refractive materials such as water and glass.

Reflective and/or transparent refractive surfaces must be present to generate caustics.

Higher caustic photons settings require more render time. When Caustic Photons are set to a value other than None, the specified effects are always shown in Final Quality Renderworks render mode, and are user-controlled for Custom Renderworks render mode (see Custom Renderworks Options) and for Renderworks styles (Creating Renderworks Styles). Regardless of the setting, caustic effects are not shown in Fast Renderworks render mode.

Show Caustics Only

When Caustic Photons is set to a value other than None, select to turn off the diffuse, specular, and global illumination features of the light, which may wash out the caustic effects. The light brightness can make the caustics brighter.

A point, spot, or custom light object with Show Caustics Only selected can be used alongside a similarly located light with this option deselected to achieve a realistic lighting effect.