Use Style

To create a custom window, leave the Unstyled setting. To use an existing window from the resource libraries, click Use Style; from the Resource Selector, double-click a resource to activate it.

Convert to Unstyled

If Use Style is currently set to a style, select this option to convert the object to unstyled; the current values are retained, but all parameters on all panes are set to By Instance to allow editing

By Style/Instance

A graphic indicates whether each parameter is set to By Style and given a fixed value or set to By Instance and editable in the dialog box. By Style/Instance settings are established by the style and cannot be changed from the settings dialog box.

To edit the window style, see Editing Plug-in Object Styles; editing the style modifies all plug-in objects in the file that use the style.

3D Preview

Dynamically displays a 3D preview of the window with the currently selected parameters

View

Select the standard view for the 3D preview of the window

Render

Select the render mode for the 3D preview of the window

Top/Plan Preview

Dynamically displays a Top/Plan preview of the window with the currently selected parameters

Window Shape

Select the window shape

All window shapes other than rectangular are fixed glass; only the appropriate parameters on each pane of the Window Settings dialog box are available for these fixed glass shapes.

Top Shape

Select the shape of the top of the window

Transom

Select whether to add a transom above the window; transom parameters are set from the Transom pane

Rise

When applicable for the selected Top Shape, enter the distance between the start of the top shape to the top of the window

Spring

Enter the distance traveled above the bottom pane before the top shape starts; if Square is selected as the Top Shape, the spring is the total height

Sash

Select the window type. Depending on the selection, a variety of window settings are enabled or disabled automatically, as described in the following sections.

To create a simple opening in a wall for defining a window break without creating any geometry to represent the window, select the Opening option. To define a custom window sash, select Custom Sash and click Custom Sash Options to open the Custom Sash Options dialog box (See Creating a Custom Window Sash Opening).

Operation

A variety of options are available; X represents an operational slider and O represents a fixed sash.

For Horizontal Slider Sash windows, choose the desired operation for creating a two-, three-, or four-panel sash.

Picture Window Slider Sash windows from files imported from older versions of Vectorworks will have the XX Operation applied. Picture Window Slider Sash windows created will have the XOX Operation applied and will have Unequal Sash selected in the Jamb and Sash pane and the Custom Sash Options dialog.

Use Symbol Geometry

Select Use Symbol Geometry and click Browse to select a window symbol from the current file’s resources. Select a symbol from the graphical list of Symbols and click OK.

The symbol Name displays in the Window Settings dialog box and the preview is updated with the selected symbol.

When a symbol is selected, all fields pertaining to the window’s geometry are disregarded; however, parametric values are still available for scheduling and reporting purposes only.

Size Reference

Select the appropriate option to define the window width and height; the Size Reference selection automatically updates the Width and Height fields, but does not change the size of the window:

●    Sash Opening - this represents the window opening including the sash and glass, but excluding the transom and jamb; this is typically used to show the window opening for emergency exit purposes

●    Unit Size - this represents the current overall window width and height, including the transom and sash; this is the default setting for imperial units

●    Rough Opening - this represents the current overall window width and height, including the transom, sash, and shim gap (for the Opening Sash configuration, the Size Reference is automatically changed to Rough Opening); this is the default setting for metric units

Width/Height

The width/height of the window is measured based on the Size Reference selection:

●    Sash Opening - width/height is measured at the outside of the sash

●    Unit Size - width/height is measured at the outside of the jamb

●    Rough Opening - width/height measures the rough opening

For circle, half circle, hexagon, and octagon shaped windows, the height parameter is disabled, and the parameter is automatically calculated based on the window’s width.

Elevation in Wall

Enter the window elevation

Elevation Reference

Select either the sill or the head of the window as the elevation reference point

Plan Wall Offset

Enter the distance to offset the window insertion point from the centerline of the wall

Curtain Wall Window

Indicates that the window will be placed in a curtain wall, where its width and height are based on the surrounding panel size and the bottom frame where it is placed. A curtain wall window does not have as many available parameter options as a standard window. Configurations are limited to those that apply to curtain wall placement.

Show Plan Detail

Select to display all the window details in Top/Plan view

Draw Wall Lines

Select whether to draw wall lines at all times; wall lines are drawn in the Ceiling-Main class to easily create reflected ceiling plans

Set Attributes By

Select whether to set the 2D graphic attributes and visibility of the listed window parts by Object, Line Style, or Class.

●    Object: disables line style and weight controls for individual parts, and uses the line style and weight settings for the window object.

●    Line Style: controls line style and weight for the individual parts; these settings override the window object’s settings.

●    Class: sets the line style and weight of individual parts by class. To control appearance and visibility, select a class from the list of classes present in the drawing, or create a new class. Select <Window Class> to place the part attributes in the same class as the window object.

Visibility Classes

To control appearance and visibility, select a class for each part from the list of classes present in the drawing, or create a new class. Select <Window Class> to place the part attributes in the same class as the window object.

3D Hinge Direction Marker

Show Interior/Exterior Marker

Select to draw lines representing the hinge direction of the window sashes on the interior/exterior side of the window in 3D

Use Hinge Marker Class Attributes

Select to set the hinge direction marker’s attributes by class

Hinge Direction Marker Class

To control visibility and, if Use Hinge Marker Class Attributes is selected, appearance, select a class from the list of classes present in the drawing, or create a new class. Select <Window Class> to place the hinge marker attributes in the same class as the window object.

Marker Points Towards

Set the hinge direction marker to point toward the hinge or toward the handle

Show 3D Open

Select to draw 3D window sashes as open at the specified Open Angle

Clerestory

Enabling Clerestory draws the window as dashed if the sill is higher than the specified elevation and draws the window as non-breaking (solid) if the sill is below the specified Cut-plane Elevation

Cut-plane Elevation

When the design layer cut plane is enabled (Vectorworks Architect required), the elevation of the window cut plane is set to the same value as that of the design layer, ensuring a uniform cut plane appearance for the layer.

When the design layer cut plane is disabled, or for the Vectorworks Spotlight or Landmark products, specify a cut plane elevation for the window when Clerestory is selected.

Include on Schedule

Select whether to include this window’s information in the window schedule and also set the window ID tag to visible

ID Prefix

Assigns alphanumeric information before the numerical label value; adding prefix information is optional

ID Label

Assigns a numerical value to the ID; this number increments automatically if the auto-increment option is chosen in the ID Settings dialog box (see Using the ID Label Tool )

ID Suffix

Assigns alphanumeric information after the label value; adding suffix information is optional

ID Class

To control visibility and, if Use ID Class Attributes is selected, appearance, select a class from the list of classes present in the drawing, or create a new class. Select <Window Class> to place the ID class attributes in the same class as the window object.

Use ID Class Attributes

Select to use the ID class attributes for the bubble line, leader line, and leader line marker

Keep ID Horizontal

When selected, automatically rotates the ID so that it is horizontal

Bubble Shape

Select the ID tag bubble shape

Bubble Size

Enter the minimum bubble size (this value represents the bubble size times the layer scale; the bubble shape is maintained relative to the text inside it for ID bubble uniformity throughout the drawing file)

Bubble Line Attributes

Select the bubble line attributes and weight, or select Set Thickness to open the Set Thickness dialog box for creating a custom line thickness

Show Leader

Select to draw a leader line from the ID tag to the window object

Line Attributes

Select the leader line attributes and weight, or select Set Thickness to open the Set Thickness dialog box for creating a custom line thickness

Include Marker

Select whether to include a marker for the ID leader line and choose the desired style from the marker list, or select Custom to create a custom marker. Select Edit Marker List to open the Edit Marker List dialog box; see Editing the Marker List.

Show Tag in 3D

Select to display the ID tag in 3D views

Horizontal Offset

If Show Tag in 3D View is selected, enter the horizontal offset of the 3D ID tag relative to the bottom left corner of the rough opening when looking at the exterior side of the window (a positive value moves the tag inside the opening relative to the starting corner; a negative value moves the tag outside the opening relative to the starting corner)

The ID tag is offset slightly from the outside face of the window sash. The size and shape of the text and bubble, if present, will match the plan settings, and the text will always be right reading from the outside of the wall. The bubble will scale with text scaling in viewports.

Vertical Offset

If Show Tag in 3D View is selected, enter the vertical offset of the 3D ID tag relative to the bottom left corner of the rough opening when looking at the exterior side of the window (a positive value moves the tag inside the opening relative to the starting corner; a negative value moves the tag outside the opening relative to the starting corner)

Corner Window

Select this option to redraw the current window as a corner window.

Settings that do not apply to a corner window may be disabled or changed when the corner window option is selected.

When you click OK to exit the Window Settings dialog box, the window is moved to the corner of the wall to which it is most closely located. To complete the corner window, insert another one into the adjacent, attached wall.

Corner windows do not work in tandem with one another. When you make adjustments to one window, you also need to update the other. This can be accomplished quickly with the Eyedropper tool or from the Object Info palette. When you make adjustments to the wall containing a corner window, the window moves along with the wall and remains locked in the corner position. When adjusting the angle of the wall, the miter is automatically adjusted in most cases; if a corner window object does not automatically update, temporarily change a parameter from the Object Info palette to force a reset of the window object.

Span Wall

Automatically adjusts the width of the window to match the span of the wall, and miters the window edges to the wall corners; therefore, the Width parameter in the General pane and Object Info palette appears dimmed

Corner Condition

Select the type of corner window:

●    Opening: creates a simple opening in a wall for defining a window break without creating any geometry to represent the window (the Sash configuration also changes automatically to Opening)

●    Cased Opening: creates a simple opening in a wall with geometry outlining the window break. Sash is set to Cased Opening.

●    Flush Glass/Flush Glass - No Sash: draws the glass right to the edge of the wall and wraps it around the corner, with a Sash set to Flush Glass or without a sash

●    Mitered Sash: draws the window with a mitered sash in the corner

●    Corner Post: draws the window with a post in the corner; specify the Size of the post, its Offset within the wall, and the type of Sash for the window

Sash

Select the window type. Depending on the selection, a variety of window settings are enabled or disabled automatically, as described in the following sections.

To create a simple opening in a wall for defining a window break without creating any geometry to represent the window, select the Opening option. To define a custom window sash, select Custom Sash and click Custom Sash Options to open the Custom Sash Options dialog box (See Creating a Custom Window Sash Opening).

Operation

A variety of options are available; X represents an operational slider and O represents a fixed sash.

For Horizontal Slider Sash windows, choose the desired operation for creating a two-, three-, or four-panel sash.

Picture Window Slider Sash windows from files imported from older versions of Vectorworks will have the XX Operation applied. Picture Window Slider Sash windows created will have the XOX Operation applied and will have Unequal Sash selected in the Jamb and Sash pane and the Custom Sash Options dialog.

Jamb

Jamb Width

Enter the face width of the window jamb (parallel to the wall)

Jamb Depth

Enter the depth of the window jamb (perpendicular to the wall)

Use Wall Depth

Select to set the jamb depth to the overall wall depth

Use Jamb Extension

Select this field to specify a jamb extension to fill any gap between the interior face of the jamb and the interior face of the wall; enter the desired Jamb Extension Width 

In 2D views, extensions use the Jamb line styles and weights; in 3D views, the extension fill color and/or textures and visibility are controlled by the Interior Jamb class.

Sash

Sash Width

Enter the sash width

Sash Depth

Enter the sash depth

Sash Offset

Enter the offset of the sash relative to the jamb depth (a positive value moves the sash toward the window exterior; a negative value moves the sash toward the window interior)

Sash Width Offset

Enter the sash width offset relative to the jamb width (leaving the default value of 0 keeps the sash adjacent to the jamb, and a positive value makes the sash intersect the jamb; a negative value is not permitted)

Glass Offset

Enter the glass offset relative to the sash depth (a positive value moves the glass toward the window exterior; a negative value moves the glass toward the window interior)

Unequal Sash

To create a double hung window with an unequal sash height, select to customize the top sash height, and enter the desired scale factor for the sash.

Picture Window Slider Sash windows will automatically have Unequal Sash selected to differentiate it from a horizontal slider sash with an XOX operation. Select to customize the width of the left and right sliders for a picture window slider, and enter the desired scale factor for the sashes. The sash scale factor applies to both the left and right sliders.

Shim Gap

Enter the distance between the jamb exterior face and the rough opening (for the Opening Sash configuration, the Shim Gap is automatically set to 0)

Show Shim Gap in Plan

Select whether to display the shim gap in Top/Plan view

Masonry Module

Enter the masonry module dimension

Glazing Thickness

Enter the glazing thickness for the sash

Include Sill

Select whether to include a sill and select the sill style type

Timber

Specify the sill lip thickness, amount of keep for the sill, sill height, total sill depth, sill extension width, stool lip thickness, and stool nose dimension

Masonry

Specify the sill lip thickness, amount of keep for the sill, rise dimension, sill height, total sill depth, and sill extension width

Brick

Specify the sill lip thickness, rise dimension, total sill depth, sill extension width, stool lip thickness, and stool nose dimension

Replace glazing with louvers for

Select to replace the glazing in the Sash and/or Transom with louver vents

Louver Type

Specify Z Blade, Chevron, or Jalousie for the louver style

Blade Spacing (1)

Enter the center to center distance between the blades

Blade Angle (2)

Enter the angle of the louver blades

Blade Lip (3)

Enter the height of the visible lip of the blades

Louver Depth (4)

Enter the depth of the louvers, typically the same as the Sash Depth on the Jamb and Sash pane

Sash

Sash Width

Enter the transom sash width

Sash Depth

Enter the transom sash depth

Mullion

Mullion Width

Enter the transom mullion width

Mullion Depth

Enter the transom mullion depth

Muntins

Pattern

Select the transom muntin pattern

Vertical/Horizontal Bars

For colonial muntins, enter the number of vertical/horizontal muntin bars

Prairie and renaissance muntins come with pre-set configurations; therefore, any number of Vertical/Horizontal Bars specified are disregarded

Bar Depth/Width

Enter the transom muntin bar width/depth

Bar Offset

Enter the transom muntin bar offset

Number of Rays

For sunburst patterns, enter the number of muntin rays

Glazing Thickness

Enter the glazing thickness for the transom

Include Interior/Exterior Trim

Select whether to include interior/exterior trim

Width/Depth

Enter the interior/exterior trim width and depth

Include Trim Under Stool/Sill

Select whether to include interior/exterior trim along the window bottom

Include Lintel

Select to add a lintel above the window or transom

Int./Ext. Protrusion

Enter the interior and exterior lintel protrusion

(1) Thickness

Enter the lintel thickness

(2) Angle

Enter the lintel angle

(3) Drop

Enter the length of the lintel drop

Top Sash/Bottom Sash

Select which sashes should have muntins applied to them

Pattern

Select the muntin pattern

Vertical/Horizontal Bars

For colonial muntins, enter the number of vertical/horizontal muntin bars

Prairie and renaissance muntins come with pre-set configurations; therefore, any number of Vertical/Horizontal Bars specified are disregarded

Bar Depth/Width

Enter the muntin bar width/depth

Bar Offset

Enter the muntin bar offset

Number of Rays

For sunburst patterns, enter the number of muntin rays

Custom Top Sash Muntins

For a double hung window with an unequal sash and colonial muntins, select to customize the top sash, and enter the desired number of horizontal bars

Include Interior Shutters

Select whether to include interior shutters

Use Custom Width

If Square is selected as the Top Shape, select whether the interior shutters should be a width other than the default value (1/2 the width of the window) and enter the desired custom width

Frame Depth

Enter the depth for the interior shutters

Offset from Jamb

Enter the offset distance from the interior edge of the window jamb that shutters will be positioned when fully opened

Panel Shutter

Select to create paneled shutters

Panel Frame Width

Enter the rail and stile width of the paneled shutter

Number of Panels

Select One panel per sash to divide shutters at sash divisions or select to divide panels equally by the Custom number of panels specified

Custom Shutter

Click Choose Symbol to select a custom shutter symbol from default content; see Concept: Resource Libraries

Custom shutters must be 3D-only symbols made from generic solids, saved in the default content location.

Include Exterior Shutters

Select whether to include exterior shutters

Use Custom Width

If Square is selected as the Top Shape, select whether the exterior shutters should be a width other than the default value (1/2 the width of the window) and enter the desired custom width

Frame Depth

Enter the depth for the exterior shutters

Offset from Jamb

Enter the offset distance from the interior edge of the window jamb that shutters will be positioned when fully opened

Panel Shutter

Select to create paneled shutters

Panel Frame Width

Enter the rail and stile width of the paneled shutter

Number of Panels

Select One panel per sash to divide shutters at sash divisions or select to divide panels equally by the Custom number of panels specified

Custom Shutter

Click Choose Symbol to select a custom shutter symbol from default content; see Concept: Resource Libraries

Custom shutters must be 3D-only symbols made from generic solids, saved in the default content location.

Centerline Marker

Select to display a centerline marker in Top/Plan view.

Size

Set the size of the centerline

Class

To control visibility, select a class from the list of classes present in the drawing, or create a new class. Select <Window Class> to place the centerline marker attributes in the same class as the window object.

Line Attributes

Select the line attributes and weight, or select Set Thickness to open the Set Thickness dialog box for creating a custom line thickness. If Use Class Attributes is selected, the line attributes are set by the part’s class

Include Marker

Select whether to include a marker and choose the desired style from the marker list, or select Custom to create a custom marker. Select Edit Marker List to open the Edit Marker List dialog box; see Editing the Marker List. If Use Class Attributes is selected, the marker attributes are set by the part’s class.

Use Class Attributes

Select to set the centerline marker’s attributes (including marker style) by class rather than the parameters in the Window Settings dialog box

Number of Components

Specify the number of interior wall components to wrap; when interior wall components are specified, the window enables a control point to set the wrapping point

Splay Wall

Select whether to splay the interior wall; the splay can be specified either as an angle/diagonal or with width and depth values

(1) Splay Angle

Enter the interior wall splay angle

(2) Splay Diagonal

Enter the interior wall splay diagonal value

(3) Splay Width

Enter the interior wall splay width

(4) Splay Depth

Enter the interior wall splay depth

Number of Components

Specify the number of exterior wall components to wrap; when exterior wall components are specified, the window enables a control point to set the wrapping point

Splay Wall

Select whether to splay the exterior wall; the splay can be specified either as an angle/diagonal or with width and depth values

(1) Splay Angle

Enter the exterior wall splay angle

(2) Splay Diagonal

Enter the exterior wall splay diagonal value

(3) Splay Width

Enter the exterior wall splay width

(4) Splay Depth

Enter the exterior wall splay depth

Window parts

To control appearance and visibility, select a class from the list of classes present in the drawing, or create a new class. Select <Window Class> to place the part attributes in the same class as the window object.

For windows with an Opening Sash configuration, in a 3D view, a no fill/no pen weight extrude completely fills the wall in place of the window; this extrude is placed in the Interior Jamb class and is filtered out in IFC export operations. Change the class settings to control the visibility of the extrude.

Include in Calculations

When selected, the window is eligible to be included in energy calculations, depending on the energy analysis settings for layer/class, element inclusion, and so on.

R-Value/U-Value

Automatic Calculation

Based on the frame and glazing parameters, the window R-Value/U-Value is calculated and displayed. This value, along with the window shading factors, is critical for a correct assessment of the building envelope in energy calculations.

Manual Input

Select this option to override the calculated R-Value/U-Value and enter a manual value for the window instead. For complex or detailed window designs, enter results from a third-party calculation here.

Frame

Select the thermal properties of the frame. Sets can be created and edited; see Specifying System Sets.

Glazing

Select the thermal properties of the window glazing. Sets can be created and edited; see Specifying System Sets.

Shading

Select the level of shade for each type of shading near the window, or select Custom from any of the lists. The Edit Shading dialog box opens, to manually enter a percentage for when the window is in the shade. Click OK to return to the Energos pane of the Window Settings.

General

Select the general shade conditions where the window is located

Surrounding

Specify surrounding shade conditions that might affect the amount of solar radiation reaching the window

Summer Shading

Specify special shade conditions that apply during the summer months (for example, when nearby deciduous trees shade the window)

Additional Shading

Select any mechanical or passive shading mechanisms in place, or select Custom and enter a shading percentage in the Edit Shading dialog box

Summer Ventilation

Opens the Summer Ventilation Settings dialog box, to specify summer ventilation options for when the window is typically open. If the window participates in summer ventilation, in the Energos Project Settings dialog box, select Include Summer Ventilation on the Systems-Ventilation tab, and click Advanced to set the global summer ventilation settings for windows on the ground and upper floors, and at night. See Energos Advanced Project Settings Systems Ventilation Pane.

●    Summer ventilation options (ground floor, upper floor, night): Select the type of ventilation system usage, if any, for the window

●    Operable opening width: Indicates the width of the window opening gap for an operable window (which affects the amount of ventilation)

Field Name

Select the data field from the list and its name displays beneath the list; information associated with the Field Name can be specified in the Field Value area. The user fields can include additional user-defined information with the window.

Field Value

Enter data for use in the window schedule