Preferences

Click drag drawing

Lets you draw objects with the click-drag method rather than the default click-click method. Click once with the mouse button and do not release; drag the cursor to a desired location and then release. See Click-click Drawing.

Eight reshape handles

Shows eight handles (four corner and four center) on most objects; deselect the option to display only four corner handles

Offset duplications

When you use the Duplicate command, places the duplicate object so that it is offset from the original object; deselect the option to place duplicates directly over the original

Auto join walls

When you use the Wall tool, automatically joins walls at corners and intersections; when walls are separated, their ends automatically heal; when walls have core components, components also automatically join (see Automatically Joining Walls)

Separate sheet views

Saves the view origin and zoom factor for each sheet layer; deselect the option to use the same view for all design layers and sheet layers

Mouse wheel zooms

Sets the default behavior of the mouse wheel and the scroll ball. When selected, the wheel zooms by default; when deselected, the wheel scrolls by default. See Zooming with the Mouse Wheel and Scrolling with the Mouse Wheel for details.

Allow Ctrl-click/option-click in-place duplication

When selected, allows a Ctrl-click (Windows) or Option-click (Mac) with the Selection tool to create a duplicate copy of a selected object in place. Since it is simple to inadvertently create duplicate objects that cannot be easily detected, leaving this option deselected is recommended; it is deselected by default. Regardless of the setting made here, duplicates can be created with a Ctrl-click/drag or Option-click/drag.

Edit text horizontally by default

Always displays the text editing box in a horizontal position, even when the text is rotated (see Creating Rotated Text)

2D conversion resolution

Sets the number of segments that will be used to represent polylines and circles when you draw and edit objects

Default compression

Specifies the default image compression to apply to images in a viewport cache and to images created by the Render Bitmap tool. PNG compression provides the best image quality but produces larger files, while JPEG creates smaller files, but with possible loss of detail. PNG is selected by default.

Allow interactive 2D symbol scaling

Specifies whether the Selection tool, in an interactive scaling mode, is allowed to resize symbol instances; if allowed, a warning can be displayed to avoid inadvertently scaling a symbol. If Never is selected, symbols can still be resized from the Object Info palette; see Scaling Symbols from the Object Info Palette.

Arrow Keys

Select an arrow and modifier key combination as a shortcut for four common operations; each key combination can be assigned to only one operation. Alternatively, disable the ability to use arrow key combinations to perform any of these functions.

Switch active layer/class

Select the key combination that switches the active layer (up and down arrows) and the active class (left and right arrows)

Pan drawing

Select the key combination that pans the drawing by half of the area currently in view

Nudge objects

Select the key combination that nudges objects by one pixel, and select whether to display an alert on the Message bar when nudging items to avoid accidentally moving objects

Move objects

Select the key combination that moves objects, and select whether to move objects by the snap grid distance or by the specified custom distance

Rulers

Shows the rulers

Show Internal Origin Marker

Displays the drawing’s internal origin in Top/Plan view. The marker does not print.

Colored axes in Top/Plan view

Displays X (red) and Y (green) axes in 2D Top/Plan view

Scroll bars

Shows the scroll bars

Black background

Uses a black drawing background instead of the default settings

Zoom line thickness

Lines in the drawing appear thicker when you zoom in (2D views or Hidden Line/Polygon render modes only); the screens redraw slower on Mac or on Windows if GDI+ imaging is enabled

Create text without fill

When you create text objects, dimension objects, and some plug-in objects that contain text, the text block has no fill, even if the default attributes are set to add a fill to new objects. This prevents objects beneath the text from being obscured.

Show parametric constraints

Displays parametric constraints

Show other objects while in editing modes

When certain complex objects are edited, an Edit window with a colored border displays in the drawing area.

When you edit solids, groups, symbols (in the drawing only), or viewports in the Edit window, select this option to make the other objects from the drawing visible and snappable during editing; deselect the option to show only the object being edited. (See Object Editing Mode for more information.)

This option does not apply to other types of objects that are edited from the Edit window, including extrudes, multiple extrudes, tapered extrudes, sweeps, meshes, floors, and roof faces. For symbols, the option applies only when you edit a symbol definition by clicking on a symbol instance in a design layer.

Gray other objects

If Show other objects while in editing modes is selected, select this option to gray the objects in the drawing that are not being edited

Use VectorCaching for faster drawing

Caches vector information for complex document entities, such as polylines and hatches; while this makes screen redraws faster, it also can potentially increase RAM requirements by up to 50 percent

Center on objects after view change

When switching standard views (such as Top or Left Isometric), centers the view to display either selected objects, or if nothing is selected, all objects on the layer or in the drawing. Centers the view on all objects in a layer if there are no objects in view after switching between layers. This helps you feel oriented when switching views or changing layers.

GDI+ imaging

(Windows only)

Draws lines of equal thickness with round end caps; also provides these features:

●    fills in 3D planar objects

●    variable object opacity

●    images with alpha channels

●    layer transparency

●    anti-aliasing

●    object transparency in X-ray Select mode

●    display text and markers in hidden line

Disable this option if you need to use OpenType fonts.

Anti-aliasing

Blends the edges of fills and lines for a smoother appearance; on Windows, this option is available only when GDI+ imaging is enabled

Navigation Graphics

This preference determines the quality of the navigational graphics during zoom, pan, and animated view changes in Top/Plan view, sheet layers, and wireframe. For video hardware that is not capable of supporting Best Performance, select either Good Performance and Compatibility or Best Compatibility.

Click here for a video tip about this topic (internet access required).

Display light objects

Controls the visibility of light objects; hide light objects to reduce screen clutter but maintain light effects

Always

Light objects are always visible

Only in wireframe

Light objects are only visible in Wireframe mode; otherwise, they are hidden

Never

Light objects are hidden regardless of the render mode

Display 3D loci

Controls the visibility of 3D loci

Always

3D loci are always visible

Only in wireframe

3D loci are only visible in Wireframe mode; otherwise, they are hidden

Never

3D loci are hidden regardless of the render mode

Edit Font Mappings

Specifies the replacement fonts for fonts that are not available. Font mappings can be changed or deleted. If mappings are deleted, the Font Mappings dialog box appears so that unavailable fonts can be mapped.

Use sound

Supplements the visual SmartCursor cues with audible cues; move the slider bar left (to reduce) or right (to increase) the program volume relative to the system volume

Log time in program

Records in a log file the time spent in the program, as well as the time spent to open and close documents; the date format depends on the language and regional settings in the operating system. The log file is called Vectorworks Log.txt, and it is created in the User Data and Preferences Folder (which displays on the User Folders tab of Vectorworks preferences).

Display minor alerts on message bar

Displays minor warnings on the Message bar instead of in a dialog box

Display classes in pop-up menus hierarchically

Displays classes hierarchically in pop-up menus including from the Object Info palette, the View bar, and dialog boxes throughout Vectorworks.

Hierarchical class display in the Organization dialog box and Navigation palette (Vectorworks Design Series required) is controlled separately, on the Classes tab of the dialog box/palette.

Run scripts in developer mode

For plug-in development, controls the display of warning messages during script execution. This is a convenient way for advanced developers to speed up the development process. By default, the scripts of scripted plug-in objects, tools, and menus are compiled once and stored in memory. The object, tool, or menu command memory cache is executed when the script is invoked. However, in developer mode, the script is compiled each time so that script changes are executed immediately and the developer does not need to restart the application to view changes.

For Python scripts, warning messages are displayed along with Python log data, and initialization code (extended properties set in the script options) are called on each run. For VectorScripts, plug-ins are compiled on each run and warning messages are displayed. Plug-ins may work more slowly when this option is enabled.

Maximum number of undos

This can be set as high as 100. Undo information is kept in memory, so the higher the maximum number of undos, the more memory may be required.

Issue undo warnings

Many actions that delete data or settings cannot be undone. Select to get a warning when you perform an action that cannot be undone.

Undo view changes

Each change to the drawing view (such as zooming and scrolling) can be undoable or not, depending on your preference.

●    Never - ignores all operations that are strictly view changes

●    Grouping All View Changes - treats all consecutive view changes as one single undoable action

●    Grouping Similar View Changes - treats similar consecutive view changes as a single undoable action

●    Individually - treats each individual view change as an undoable action

Enable palette docking

(Windows only)

Lets you dock palettes; deselect the option to disable docks and to undock all active palettes

Automatically append file extensions

(Mac only)

Appends the appropriate file extension (.vwx, or .sta for template files) to a newly created drawing file on a Mac

Display default content

Enables content (specifically from the Libraries\Defaults folder located in the Vectorworks and/or User folder) for selection in various places throughout the program; such as the Text Style list on the Tool bar for the Text tool. This setting does not apply to downloaded content libraries, or to default content displayed in the Resource Manager and Resource Selector.

Create a new document on startup

Creates a new, untitled file when the program is launched. The new file is based on the Default.sta template file, if one exists in your user or workgroup templates folder (see Opening a Template Automatically). Otherwise, the new file uses no template, and has the default program settings for attributes, scale, and units. When this option is deselected, select File > New to create a new file.

For a non-template file, if the default units are not the desired units, it may be possible to modify them via the operating system settings. See Units.

Change active layer for Similar Object Creation

(Design Series required)

When the Create Similar Object command is invoked, changes the active layer to be that of the source object. Select this option to create the new object on the same layer as the source object. See Creating Similar Objects.

Use local help even when an Internet connection is available

When you are connected to the internet, the help system is obtained online. When you are not connected, the local version of the help displays. There is not normally a big difference between the online and local versions. If bandwidth or connection issues cause online help display or searching to become unacceptably slow, select this option to always use the local version of the help system.

Enable Mac OS restore windows functionality for Vectorworks

(Mac only)

For Mac OS X 10.7 and later, enables the operating system to automatically restore previously open files when re-launching Vectorworks. Keep this option deselected when working with several different versions of Vectorworks, to prevent older versions from unsuccessfully attempting to open newer version files. This option is not available on Windows or versions of the Mac operating system prior to 10.7.

Check for updates

Select how often the program should check for available software updates. When the specified update check interval has elapsed, an alert dialog box opens if a new Service Pack (maintenance release) or major release of the software is available.

If both a Service Pack and major release are available simultaneously, the system will send notification about the Service Pack first, followed by notification about the major release in the next session.

●    Click More Info (or Tell Me More) in the alert dialog box to open a web browser to display and download the available update. You must exit the program to successfully install the software update.

●    If it is not convenient to update the software at this time, click Not Now (or Remind Me Later) in the alert dialog box. The alert dialog box will redisplay when the specified update check interval has elapsed.

●    To disable notifications of a major release until the next major release is available, click Not Interested.

If the program is unable to connect to the update server, it attempts to connect once a day for seven days after the original failed attempt. If a connection to the update server still cannot be established, a dialog box opens to suggest running a manual update. If the Check for Updates command is run after the automatic update check fails, the next automatic update check occurs the day after the manual check.

Error reporting

Sends anonymous information about application crashes and other basic usage statistics to Vectorworks to help improve the software. Four levels of informational detail can be selected:

●    Send nothing: When you check for updates or activate Vectorworks software, we always collect general data about the operating system, graphics card, monitor resolution, and Vectorworks version.

●    Send crash details: In addition to the general information that is always collected, this allows us to receive additional information in the event of a crash, including idle time, alerts received, workspace information, and graphics card operations prior to the crash.

●    Send crash details and light usage patterns: Selecting this option invaluably assists us with product development while maintaining user privacy. In addition to the previously listed information, we are able to duplicate actions taken before a software crash, review undo actions, determine which objects may have been selected, and view Vectorworks-related file paths. We cannot see the data in your drawings, and the reporting has no impact on your software operations. Reporting happens in the background as you work and should not affect your workflow.

●    Send crash details and verbose usage patterns: Selecting this option invaluably assists us with product development while maintaining user privacy. In addition to the information gathered through the light usage pattern option, we are able to upload additional information such as tool and command selection. We cannot see the data in your drawings, and the reporting has no impact on your software operations. Reporting happens in the background as you work and should not affect your workflow.

Serial Numbers

Opens the Serial Numbers dialog box to add or remove serial numbers for all installed Vectorworks products (see Adding and Removing Serial Numbers).

A change to this preference setting cannot be undone with the Undo command.

Reset Saved Settings

Reverts to default settings instead of user-specified settings for tool modes, dialog box positions, and dialog box values. For palette positions and settings, reverts to the settings established when the workspace was created (in the User Data and Preferences folder).

In the dialog box that opens, select whether to reset settings for always performing the selected action in alert dialog boxes. Also select whether to reset settings for all tool modes, dialog box positions, dialog box values, and palette positions and settings. Click OK to return to the Vectorworks Preferences dialog box.

A change to this preference setting cannot be undone with the Undo command.

Palette margins (Mac)

Sets whether the document window leaves a space for palettes when the window is opened

3D Rotation

Sets the detail level that displays while the 3D view is rotated. Select Detailed to display objects completely, and to rotate slower. Select Responsive to rotate faster, and to display objects with less detail during the rotation.

Retain Rendering Model

Determines the degree to which the program retains the rendered model in memory during 3D rotation. Select Never to force the model to always display in Wireframe mode; select Always to force the model to remain rendered.

3D conversion resolution

Sets the segmentation resolution used to display curved 3D objects; affects extruded and swept polylines, circles, and arcs

Render mode when changing from Top/Plan to a 3D View

Sets the preferred 3D render mode to OpenGL or Wireframe; this setting is applied whenever a drawing is switched from Top/Plan to a 3D view

Projection when changing from Top/Plan to a 3D View

Sets the preferred 3D projection to Orthogonal, Narrow Perspective, Normal Perspective, or Wide Perspective; this setting is applied whenever a drawing is switched from Top/Plan to a 3D view

Use occluded selection and snapping

In rendered views, solid objects “occlude,” or hide, objects behind them. Keep this option enabled to more easily select, and snap to, solid objects without interference from hidden geometry. To access hidden geometry, use the X-ray Select mode of the Selection tool, turn on the clip cube, or switch to Wireframe render mode; see X-ray Select Mode.

Autosave every

Enables the Autosave feature; also sets the number of minutes or operations between autosaves

Confirm before save

Before each save, opens a dialog box so that you can choose either to save or to continue to work without a save. The timer/counter resets regardless of which option is selected. See Automatically Saving Files.

Overwrite original file

Writes over the original file with the latest changes during a save

Autosave a backup copy to

Automatically saves a backup copy of the file either to a folder named VW Backup (in the same folder as the original file) or to a custom location, such as a network drive (click Choose to select a folder). The original file is not saved automatically; to save it, use one of the save commands on the File menu.

Backup files have unique names that include the word “Backup” and a date and time stamp appended to the original file name. Use backup files to restore a project if something happens to the original file.

Keep the ___ most recent backups

If Autosave a backup copy to is selected, specifies the maximum number of backup files to keep; the oldest backup file is replaced when a new backup is made

Cursor

Full screen cursor

Displays a crosshair cursor that extends to the edges of the drawing area

Show selection box

Displays a box beneath the cursor that indicates the active selection area; an object beneath the box can be selected when the mouse is clicked

Show snap box

Displays a box around the cursor that indicates the area in which to find possible snap points; when a snap point is beneath the box, it can be snapped to

Show acquisition hints

Show graphical hints near the cursor when smart points, edges, and vector locks can be acquired (see Concept: Snapping Indicators)

Selection box size

Controls the size of the selection box, if Show selection box is selected; must be smaller than the snap box. The actual size of the selection box is shown.

Snap box size

Controls the size of the snap box, if Show snap box is selected; must be larger than the selection box. The actual size of the snap box is shown.

Highlighting

Selection highlighting

When enabled, objects that are selected are highlighted with the specified colors and patterns, and square handles indicate points that can be used to reshape objects using the tool that is currently active.

When this option is disabled, square handles indicate objects that are selected, and the handles may or may not be reshape points.

Animation

If Selection highlighting is selected, specify how the selection highlights will be animated when the cursor moves out of the drawing window or over a palette:

●    Off turns off all animation of highlights

●    On pulses the highlight continuously

●    Burst briefly highlights with 100% opacity

Cursor pre-selection highlighting

Highlights any object that can be selected when the cursor is over the object

Highlighting timer

When a drawing object is beneath the cursor, specifies the number of seconds to delay before pre-selection highlighting begins

Marquee pre-selection highlighting

As a selection marquee is drawn over objects, highlights any object that will be selected

Snapped object highlighting

Highlights the geometry that generated the current snap

Tool highlighting

Highlights any object that can be modified or used by the current tool when the cursor is over the object

View transition animation

Animates the transition from the current view to a new view, providing a smoother experience when changing views.

Rendered views may temporarily switch to wireframe view during the transition, specifically when switching from sketch to wireframe, dashed hidden line to interactive hidden line, and any polygon or Renderworks rendering mode to OpenGL

Interactive Appearance Settings

Opens a dialog box to change the appearance of the interactive elements in Vectorworks, including general elements, object highlighting, SmartCursor elements, and snap points

User Data and Preferences Folder

Specifies the folder that contains program preferences, log files, workspaces, and any personal content you create. This might be a folder on the local computer, or on an external drive or network drive; this allows you to run Vectorworks from any computer.

A change to this preference setting cannot be undone with the Undo command.

Choose

Click Choose to specify a new user data folder. The program must be restarted if you change the location of the user data. See Creating a New User Data and Preferences Folder for details.

Explore (Windows) or Reveal in Finder (Mac)

To look at the contents of the current folder, click Explore (to open Windows Explorer) or click Reveal in Finder (to open Mac Finder)

Workgroup and Project Folders

(Design Series required)

Permits access to content for the Vectorworks program from a location that is shared with other users. To share customizations with other users, place the files in a network folder, and then notify other users so they can designate that folder as a workgroup folder. See Sharing Custom Content Using Workgroup Folders for details.

A change to this preference setting cannot be undone with the Undo command.